UNPKG

@abandonware/bleno

Version:

A Node.js module for implementing BLE (Bluetooth Low Energy) peripherals

abandonware/bleno

45 lines (33 loc) • 2.42 kB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
bleno - [blink(1)](http://thingm.com/products/blink-1/) example =============================================== This example allows you to control a [ThingM](http://thingm.com/) [blink(1)](http://thingm.com/products/blink-1/) via BLE. It uses bleno and [node-blink1](https://github.com/sandeepmistry/node-blink1) and requires a blink(1) to be connected via USB. See [main file](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/main.js) for entry point. [Device Information service](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/device-information-service.js) ----------------------------------- UUID: [0x180A](https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.device_information.xml) __Characteristics:__ * [Serial Number](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/serial-number-characteristic.js) * UUID: [0x2a25](https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.serial_number_string.xml) * Properties: read * Description: read the blink(1)'s serial number * [Hardware Revision](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/hardware-revision-characteristic.js) * UUID: [0x2a27](https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.hardware_revision_string.xml) * Properties: read * Description: read the blink(1)'s version blink(1) service -------------------- UUID: 0x01010101010101010101010101010101 __Characteristics:__ * [RGB](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/blink1-rgb-characteristic.js) * UUID: 01010101010101010101010101524742 * Properties: write, write without response * Description: Set the blink(1)'s color * Data format is: RRGGBB (3 bytes) - single byte for each color * [Fade RGB](https://github.com/sandeepmistry/bleno/blob/master/examples/blink1/blink1-fade-rgb-characteristic.js) * UUID: 01010101010101010166616465524742 * Properties: write, write without response, notify * Description: Fade the blink(1)'s color and notication when fade is complete * Data format is: TTTTRRGGBB (5 bytes) * TTTT - fade time in milliseconds (Little Endian) * RRGGBB (3 bytes) - single byte for each color